2 x 1 Port Stacked RJ45 Modular Phone Jack , 100 / 1000M Shielded RJ45 Connectors

2 x 1 Port Stacked RJ45 Modular Phone Jack , 100 / 1000M Shielded RJ45 Connectors

1.10/100/1000M MagRJ45
2.Stacked Tab-up modular jack
3.Shielded  RJ45 Modular Jack
4.Router, PC Mainboard, SDH, PDH

Description:

2X1 Tab-up 10/100/1000M POE/POE+ RJ45 Magjack with/without leds, meeting IEEE 802.3af/at

1. Product Type Features:                                                  

  1) Product Type = Connector  
  2) Jack Type = RJ45 
  3) Profile = Standard 
  4) PCB Mounting Orientation = Side Entry (Right Angle)/Top Entry(Vertical)

2. Mechanical Attachment: 
  1) Jack Configuration = 1 x 1

3. Electrical Characteristics: 
  1) Shielded = Yes

4. Termination Related Features:
  1) EMI Finger - Bottom = Without
  2) Termination Method = Solder

5. Body Related Features:
  1) Port Configuration = Single/Multi
  2) EMI Fingers -Top and Sides = With/ Without
  3) Latch Orientation = Standard - Latch Down
  4) PCB Tail Length

6. Contact Related Features:
  1) Preloaded = Yes
  2) Contact Termination Type = Through Hole/Surface Mount

7. Housing Related Features:
  1) Connector Style = Jack

8. Industry Standards:
  1) RoHS/ELV Compliance = RoHS compliant, ELV compliant 
  2) Lead Free Solder Processes = Wave solder capable to 240°C,

      Wave solder capable to 260°C, Wave solder capable to 265°C
  3) RoHS/ELV Compliance History = Always was RoHS compliant

9. Identification Marking:
  1) Left LED Color (Position #1) = Green - 250 ohm resistor
  2) Right LED Color (Position #2) = Green - 250 ohm resistor

10. Conditions for Usage:
  1) Applies To = Printed Circuit Board
  2) Environmental Conditions = Office / Premises
  3) Operat
2 x 1 Port Stacked RJ45 Modular Phone Jack , 100 / 1000M Shielded RJ45 Connectors